MISCELLANEOUS
Catalog Home
BODY
Bickel Wing Support Kits
Description: Our kit consists of complete 4130 chromoly tube assemblies, upper wing supports, rod ends, bumper/wing strut mounts, and quick pins. Wing supports are adjustable to 15 different positions. Kits are complete with all attaching hardware.
JBRC2013C Custom Chevrolet wing support kit
JBRC2013M Custom Ford Mustang wing support kit
Price: $239.00
Bickel Spill Plate Support Kit
Description: Kit consists of complete 4130 chromoly tube assemblies, spill plates supports, rod ends, mounts, and quick pins. Adds support for spill plates front and rear (2 attaching points each side). Kit is complete with all attaching hardware.
JBRC2013SPS Wing spill plate support kit
Price: $139.00
Bickel Tube Protectors
Description: The original and best fitting protectors on the market today. Wraps around tube, easy to install, protects tube from scratching, all tube sizes come in 48" lengths.
Available for 1 1/4", 1 1/2", 1 5/8", and 1 3/4" tube. Specify tube size.JBRC2191 Carbon fiber tube protectors
Price: $69.00
Glasstek '93-'02 Firebird Dash
Description: Molded fiberglass dashboard, 55" wide, fits '93-'02 Firebird
DB002 '93-'02 Firebird dashboard
CALL FOR PRICING
Glasstek '93-'02 Camaro Dash
Description: Molded fiberglass dashboard, 2 pieces, 55" wide, fits '93-'02 Camaro
DB017 '93-'02 Camaro dashboard
CALL FOR PRICING
RaceCraft Mustang Wing
Description: Racecraft Inc. Pro Series wing is the industry standard when it comes to design and quality. All wings are CNC cut to fit your Mustang perfectly without trimming. All Racecraft Inc. wings feature CNC cut parts, 4130 chromoly support rods, stainless steel hardware, and the industry's first adjustable 90 degree wicker that adjusts to heights of 3/8, 1/2, and 5/8 of an inch so you can fine tune the amount of down force track conditions require. Fits '80-'93 Mustang
400100 '80-'93 Mustang coupe wing, 15"
Price: $595.00
RaceCraft Camaro Wing
Description: Standard wicker height adjustments: 3/8", 1/2", 5/8". Fits '93-'02 Camaro, does not fit the SS deck lid.
400117 '93-'02 Camaro 17" strutless wing
Price: $695.00
RaceCraft Wing Filler Panel
Description: The 93-02 deck filler panel is constructed of .060 aluminum, designed to work with the factory Z28 deck lid, and enhances the capabilities of RaceCraft wing #400117. This is accomplished by sealing off the lower valance port and directing 100% of the air to the wicker. The filler panel is fabricated in 2 halves with a flush mount splice joint at the center of the car. This joint is bolted together with stainless 6-32 hardware along with mounting point near the front edge of the hatch. The filler is designed to be epoxied into place on the window and the deck lid with a good automotive bonding glue. Fits '93-'02 Camaro
400118 '93-'02 Camaro deck filler panel
Price: $149.00
RaceCraft Dzus Rails
Rivet-on
Description: Made from .063 5052 aluminum and comes with 1/8" x 3/16"-1/4" grip steel rivets large diameter flange for mounting the rails without removing fender. We suggest for more secure installation to use our stainless steel 6-32 x 1/2" bolts with NYlock nut kit (Using bolt kit will require removal of your fender for installation). Dzus fasteners and hardware sold separately. Sold in pairs.
704065 '79-'93 Mustang rivet on fender dzus rails
704073 '93-'97 Camaro rivet-on fender dzus rails
Price: $85.00
Bolt-on
Description: Comes with all necessary hardware for proper rail mount installation. Dzus fasteners sold separately. Fits 98-'02 Camaro
704070 '98-'02 Camaro bolt-on fender dzus rails
Price: $145.00
Description: Made from .063 5052 aluminum and come with the necessary hardware for proper rail mount installation. Dzus fasteners sold separately. Designed for .000-.187 hood thickness. Fits '98-'02 Camaro
704071 '98-'02 Camaro bolt-on front dzus rails
Price: $42.00
Description: Comes with all necessary hardware for proper rail mount installation. Dzus fasteners sold separately. Sold in pairs. Fits '98-'02 Camaro
704072 '98-'02 Camaro bolt-on rear dzus rails
Price: $52.00
RaceCraft Seat Brackets
Description: Fits 15"-18-1/2" seats. These seat brackets are designed to bolt a Kirkey Pro-Street or Economy seat into the factory location on 3rd and 4th generation Camaros. This will allow you to keep your carpet intact while still allowing the use of an aftermarket race seat. These brackets also allow for height and depth adjustment. Comes with grade 8 hardware for proper installation. For Kirkey, Jaz, and Racetech seats.
800415 '82-'02 Camaro driver side seat brackets
800416 '82-'02 Camaro passenger side seat brackets
Price: $154.95
FUEL
Bickel Fuel Cell Mount
Description: The rules mandating front fuel cells require an 1-1/4" x .065 4130 chromoly surround pipe. Designed to slip-fit and bolt to receiver tubes welded to chassis and retained by a 1/2" chromoly tube and strap. Available for 2 ,3 or 4 gallon fuel cell. All hardware included. Specify cell brand and model number. Cells not included in price.
JBRC1042 Front fuel cell mount
Price: $205.00
Bickel Fuel Cell
Description: Size: 1.5 Gallon, 7" x 7" x 8 1/2", This fuel cell has SFI certification tag required for NHRA Pro/Stock
JBRC112 1.5 Gallon Pro Stock fuel cell
Price: $395.95
OILS AND FLUIDS
LAT R-30S Synthetic Racing Oil
Description: LAT synthetic racing oils are blended for maximum horsepower engines that require added protection for valve train, ring seal vacuum, and maximum film strength for all bearing surfaces. LAT uses the highest quality group VI and V based oils in the industry. Our exclusive LFR additives provide exceptional high RPM protection by substantially reducing friction, scuffing, and galling while reducing engine temperatures. PAO and esters synthetic-based oils actually increase horsepower and torque as much as 6%.
Also available in 20W50.1 gallon - Price: $101.00
1 case (4 gallons) - Price: $404.00
LAT Nitro 50-HP Synthetic Racing Oil
Description: LAT’s Nitro 50-HP blends are specifically formulated to withstand the extreme conditions found only in nitromethane and alcohol burning engines. Nitro HP offers high viscosity, zinc content, high film strength, and a robust additive package. Developed for superior protection under heavy fuel dilution conditions and protects against piston scuffing and valve train wear. Also available in 70WT.
1 gallon - Price: $66.00
1 case (4 gallons) - Price: $264.00
LAT Pro 15W40 Semi-Synthetic Racing Oil
Description: LAT'S Pro 15W40 semi-synthetic racing oils are formulated for engines running high RPM's for extended periods of time, producing higher heat ranges. Pro 15W40 is a unique blend of group 2 petroleum and group 5 ester base oils, combined with a highly robust detergent package. LAT exclusive LFR additive, zinc levels over 2,000 ppm, and high shear polymer make for maximum horsepower and protection. Also available in 20W50.
1 quart - Price: $16.95
1 case (12 qts.) - Price: $203.40
LAT 85W140 Semi-Synthetic Racing Gear Oil
Description: LAT’s new semi-synthetic racing gear oils are formulated for extreme shock load and high temperature conditions. Using advanced LFR additives along with high levels of phosphorus and sulfur offers maximum protection for race applications.1 quart - Price: $19.20
LAT Pro ATF Transmission Fluid
Description: LAT Pro ATF synthetic is specifically blended for use in automatic racing transmissions. When you’re producing extreme torque, high horsepower, and high temperature ranges, you need a blend that can take the punishment. Benefits include cooler operating temperatures, faster lock-ups, smoother shifts, and improved elapsed times. Our exclusive LFR technology reduces wear and offers longer life on all internal parts.
1 gallon - Price: $92.00
1 case (4 gallons) - Price: $368.00
PIT EQUIPMENT / TOOLS
Jerry Bickel Pro-Jacks
Description: Requiring only 2 1/2” of clearance, Bickel's E-Z Lift jack system will slide under the lowest of chassis. With the use of this professional jack system, raising and lowering your car becomes a simple task. After the car has been lifted and the safeties are in place, you have a solidly supported work station, much like supporting the car with individual jack stands. We designed the system using a one-way adjustable flow control valve, making it possible to lower the car at a desired rate. All materials are 4130 cromoly tubing with heavy duty 3/4” rod ends. The entire system is chrome plated for durable, long lasting finish and a professional appearance. The system utilizes an air-over-hydraulic pump, heavy duty hoses with quick disconnect couplings on both ends, and swivel fittings which help eliminate twisted hoses. Optional electric-over-hydraulic pump is available at an extra charge. System comes complete with installation instructions and rear frame lifting tabs. Frame rail center to center width is required when ordering. Capacity #2800 lbs., heavy duty systems available.
CALL FOR PRICING
Dzus Tool
Description: Easy grip handle. Unlike a screwdriver, the blade is contoured to fit inside the 1/4 turn fastener without stripping the slot. Makes fast and easy work of removing and attaching dzus fasteners.
Price: $4.99
Joe's Racing Helmet Hook
Description: Tired of scratching up the old brain bucket by just tossing it into the race car? Hang that skid lid on a Joe's helmet hook. Simply bolt it to a cross tube on the roll cage and you’ll be hooked. Made from lightweight, gray anodized 6061-T6 aluminum. Available with a 1″, 1¼”, 1½”, 1⅝” and 1¾” clamp.
Price:
1" Clamp, black - $19.95
1" Clamp, gray - $18.951 1/4" Clamp, black - $19.95
1 1/4" Clamp, gray - $18.951 1/2" Clamp, black - $16.95
1 1/2" Clamp, gray - $16.951 5/8" Clamp, black - $16.95
1 5/8" Clamp, gray - $15.951 3/4" Clamp, black or gray - $16.95
Joe's Racing Tire Tape
Description: Measure your tires accurately with our ¼” wide by 10 foot long tire tape. Our Tire Tape features a magnet on one side allowing for easy storage and accessibility, and won’t kink like wider tapes.
Price: $7.95
WINDOWS
Optic Armor Windows
Current models in production:
Camaro 1967-1969 - Camaro 1970-1981- Camaro 1982-1992 - Camaro 1993-2002 - Camaro 2010-2015
Mustang 1979-1993 - Mustang -1994-2004 - Mustang 2005-2014 - Mustang 2015-2017
Corvette1997-2004 - Corvette 2005-2013 - Corvette 2014-2018
GM G-Body Front Windshield (only)
Chevrolet / S-10 - GMC / SonomaEach drop in window now comes with two tubes of urethane.
1/8" Windshield, clear, molded - Price: $540.00
3/16" Windshield, clear, molded - Price: $595.001/8" Windshield, tinted, molded - Price: $595.00
3/16 Windshield, tinted, molded - Price: $649.00
1/8" Rear window, clear, molded - Price: $540.00
3/16" Rear window, clear, molded - Price: $595.001/8" Rear window, tinted, molded - Price: $595.00
3/16" Rear window, tinted, molded - Price: $649.00
NAVIGATE SITE:
Home
Catalog Home
Projects
Shop Install Pics
Videos
